Форум за електроника

[vladislavg]

tv samsung cz-21m063n процесор TDA9351PS/N3/3/1616 памет A81DC
шаси KS9A -търся дъмп и влизане в сервизен режим.

[danco]

За начало влизане в сервиз:
This mode uses the standard remote control.
The Service Mode is activated by entering the
following remote-control sequence :
(1) DISPLAY→FACTORY.
(2) STAND-BY→ DISPLAY→ MENU→ MUTE
→POWER ON.
2. The “SERVICE (FACTORY)” message will be
displayed. The Service Mode has three components:
ADJUST, OPTION,OPTION1,G2 Adjust
and Reset.
3. Access the Adjustment Mode by pressing the
“VOLUME” keys ( Up or Down). The adjustment
parameters are listed in the accompanying
table, and selected by pressing the CHANNEL
keys ( ,).
4. Selection sequences for the all system:
DOWN or UP key:
AGC>SCT>SBT>BLR>BLB>RG>GG>BG>
VSL>VS>VA>HS>SC>CDL>STT>AKB>
PDL>NDL>PSR>NSR>VOL>LCO>TXP>
MVOL>FMWS>AGCS>OMD>SCL>PWL>
AGN>PEK>ACL>FCO>SCBT>SSP>PSNS
5. The VOLUME keys increase or decrease the
adjustment values (stored in the
non-volatile memory) when Adjustment Mode
is cancelled.
6. Cancel the Adjustment Mode by re-pressing
the “FACTORY” or “Power OFF” keys.