Форум за електроника

[kxa]

Колеги здравейте
Бихте ли ми помогнали как с поправката на принтер Brother DCP-120c
Дава грешка 46, Освен това пише Unable to init.
Blagodarq

[Expressel]

Най-вероятно е препълнен брояча за отпечатани копия: Ето това става за Brother DCP130C пробвай може да помогне:
- pull out the AC plug
- put back the AC plug while holding down the “menu” button and keep holding it (15 sec)
- now you are entering the MAINTENANCE mode and “error 46” pops up in the display
- select 8 by using the arrow buttons ,push OK and select 0 and push OK
- 00:00 00:01 OK (the display is showing this message)
- now push the MONO button 25 times until you see PURGE: xxxxx
- Select 2, push ok, select 7,push ok,select 8,push ok, select 3,push ok
- the purge counter indicates now: purge: 00000
- switch off the printer ,switch it on
- ready to print
- CHEERS!