Форум за електроника

[Velkov]

Проблема е че не мога да клонирам сигнала върху телевизора.Показва се само на телевизора фона на PC-то без иконите.Също ми изписва и това "The application failed to initialize prpperly (0xc0000135).Click on OK to terminate the application. Явно имам проблем с драйварите които ги изтеглих от страницата на "Радеон
" Някои ако има диска с този модел драйвари ще може ли да ми ги прати на пощата ???? [email protected]

[Techmaniac]

Със тези http://support.amd.com/us/gpudownload/Pages/index.aspx опитали ,за каква ОС ти трябват ?

[Velkov]

За XP професионал.Да точно от там ги дръпнах и нещо не е наред.

[Techmaniac]

Виж това : http://forums.legitreviews.com/about11456.html


Re: ATI Radeon 9550

Postby Apoptosis » Thu Sep 06, 2007 9:53 am
(0xc0000135) means the application you are launching failed to initialize properly...

What exact ATI driver are you installing? Are you running Windows XP with SP2 and all the latest windows updated including Microsoft .NET?

ATI CATALYST 7.8 drivers should work on the Radeon 9550 video card and can be downloaded here: http://ati.amd.com/support/drivers/xp/radeonx-xp.html

ATI CATALYST Driver Installation Guide:

Installing the .NET Framework

The CATALYST Control Center requires Microsoft .NET Framework prior to installation. The CATALYST Control Center is an application that allows you to control the configuration of your ATI product. You can verify that you have the .NET Framework by checking in the Add/Remove Programs list in the Control Panel. If the .NET Framework is not listed, please download, and install it before proceeding. Microsoft .NET Framework
Installing the Catalyst Software Suite

The Catalyst Software Suite contains the Display Drivers, WDM drivers, and the Catalyst Control Center. Once the file is downloaded, please follow the directions below.

1. Double-click on the downloaded driver file. Windows XP Service Pack 2 users will see this dialog box. Click Run to start the install process.

Use the default directory for extracting the files and press the Install button.
At this point the driver will start the extracting process before the actual system install begins.

2. Click Next on the first install screen.
3. Click Yes to the License agreement.
4. Click the Express button.

The installer will start to load the display driver first.
Next you will see the WDM Capture drivers load (for VIVO or All-In-Wonder).
The Catalyst Control Center setup will start shortly after.
A dialog box will indicate the install progress.

5. Click Finish to restart your computer.

This concludes the installation of the display driver.

Преди това деинсталирай сегашния видео драйвер

Removing Old ATI Software

1. Click on Start, then Control Panel, then go to Add/Remove Programs.
2. At the top of the list you should see several ATI entries. Select the entry entitled ATI Software Uninstall Utility, and click Change/Remove.
3. You will be prompted to restart your system once the uninstall is complete.
4. Once restarted, check the Add/Remove Programs list again for any remaining ATI software.
5. If any ATI software is still listed, click Change/Remove on those entries to uninstall each one individually.
6. Next, please scroll through the list until you find an entry called DAO (see screenshot below).
7. Select DAO, then Click Change/Remove to uninstall this program.